How to play Minesweeper
- Read a number as the count of mines among the up to 8 squares around it.
- If a number already has that many flags around it, every other covered neighbour is safe.
- If a number has exactly as many covered neighbours as its value, all of them are mines: flag them.
- Learn the 1-2-1 and 1-2-2-1 edge patterns to settle harder spots.
- Finish when every mine is flagged and every safe square is open.
Minesweeper rules
The board
- The board is a grid of covered squares. Some of them hide a mine.
- An uncovered square shows a number from 1 to 8, or nothing.
- The number is how many mines are in the 8 squares that touch it, including diagonals. Squares on an edge or in a corner have fewer neighbours (5 or 3).
- A blank uncovered square has no mines around it, so its neighbours are all safe.
Your actions
- Uncover a square you have proved is safe.
- Place a flag on a square you have proved holds a mine. A flag is a mark; it does not change the numbers.
Winning
- The board is cleared when every square without a mine is uncovered.
- In Gridwise the goal is to flag every hazard on the board.
Minesweeper techniques, from first game to expert
Beginner
1. Count to the number
Look at a 1 that touches just one covered square. That square is a mine. In general, when the covered neighbours of a number equal the number minus its flags, all of those covered squares are mines.
Beginner
2. Clear around a satisfied number
A 2 with two flags beside it is satisfied. Every other covered square around it is safe and can be opened. This is the move you will make most often.
Improving
3. Read the 1-2-1 pattern
Three numbers 1, 2, 1 in a straight row against a row of covered squares: the mines sit opposite the two 1s, and the square opposite the 2 is safe.
Improving
4. Read the 1-2-2-1 pattern
Four numbers 1, 2, 2, 1 in a row along covered squares: the mines sit opposite the two 2s, and the squares opposite the 1s are safe.
Expert
5. Subtract one number from its neighbour
Two side-by-side numbers share most of their neighbours. If a 1 and a 2 sit next to each other along an edge, the 2 sees one covered square that the 1 does not, and that extra square must hold the second mine.
Expert
6. Use the total mine count late
Near the end, compare the mines still unflagged with the covered squares left. If 2 mines remain and only 2 covered squares are left in a pocket that must hold them, both are mines.
A worked example
Picture an open area with a straight edge. Above the edge, four uncovered numbers read 1, 2, 2, 1 and, further along, a separate run reads 1, 2, 1. Below each number is a covered square. Call the covered squares under the 1-2-2-1 run A, B, C and D, with W to the left of A and Z to the right of D.
The 1-2-2-1 run.
- Suppose A is a mine. The first 1 sees W, A and B, so W and B are safe.
- The first 2 sees A, B and C. With A a mine and B safe, C must be a mine.
- The second 2 sees B, C and D. B is safe and C is a mine, so D must be a mine as well.
- Now the last 1 sees C, D and Z, and two of them are mines. A 1 cannot have two. So the guess in step 1 was wrong: A is safe.
- The same reasoning from the other end shows D is safe.
- The first 2 sees A, B and C with A safe, so B and C are both mines. Flag them.
The 1-2-1 run. Call its covered squares P, Q and R.
- If Q were a mine, each 1 would already be satisfied, so P and R would be safe.
- The 2 would then see only one mine, Q. That contradicts the 2.
- So Q is safe, and the 2’s two mines are P and R. Flag them and open Q.
Once you have seen these two shapes a few times, you recognise them at a glance instead of reasoning them out. The proofs above are worth working through once, because the same trick, assume and look for a contradiction, solves the positions that are not a named pattern.
History and variants
Minesweeper became widely known as a computer game in the early 1990s. Common variants change the board shape or the neighbourhood, but the counting rule stays the same. Puzzle versions give a board that can be solved by deduction, while the classic game generates mines at random and can force a guess.
Where to play Minesweeper
Gridwise
Logic puzzles in one calm app
- Gridwise frames each Minesweeper level as 'flag every hazard'.
- 300 levels on a path; every tenth level is a trophy level.
- Plan on about 3 minutes for a level.
- Stuck? Pip can nudge you, explain the next deduction or make it.
- No lives, no energy and no signal needed.
Questions about Minesweeper
What do the numbers mean in Minesweeper?
A number is the count of mines in the 8 squares touching it, diagonals included. A 3 means exactly three of its neighbours hide mines.
Can you always win Minesweeper without guessing?
In the classic random version, no: some layouts leave a true 50-50. Puzzle versions that are checked by a solver avoid this, so each square can be proved safe or mined.
What is the 1-2-1 pattern in Minesweeper?
Along a straight edge of covered squares, the numbers 1, 2, 1 mean the mines are opposite the two 1s and the square opposite the 2 is safe.
What does a blank square mean?
No mines touch it. All 8 neighbours are safe, which is why a blank opens a whole area at once.
How do you start a game of Minesweeper?
Find the numbers whose covered neighbours all must be mines, or whose mines are already flagged. Those give certain moves; build outward from them.
Facts checked against the game's own design documents on .