Skip to content

Minesweeper patterns

A handful of number patterns solve most of a Minesweeper board without guessing. Here is each one on a proved diagram with its one-line rule: 1-1 against a wall, 1-2, 1-2-1, 1-2-2-1, the 1-1-1 corner, a number in a corner, and reduction. Then drill them below.

  • 1Pattern number
  • Covered
  • Flagged earlier
  • Mine, proved
  • Safe, proved
  • Board edge
  • Board carries on
  • 1-1 against a wall

    Next to a wall, the third cell across from a 1-1 is safe.

    The 1 by the wall touches only two covered cells, so its mine is one of those two. The next 1 touches the same two cells and one more. Its one mine is already among the shared pair, so the third cell is safe.

  • The 1-2

    The cell the 2 reaches and the 1 doesn't is a mine.

    The 2 touches three covered cells, and two of them are shared with the 1. The 1 allows at most one mine in that shared pair, so the 2's second mine must be its third cell. That also places the 1's mine inside the pair, so the cell on the 1's far side is safe.

  • The 1-2-1

    A mine across from each 1, and the cell across from the 2 is safe.

    Read it as two 1-2s back to back. Each one puts a mine on the far side of the 2, which is the cell above each 1. The 2 now has its two mines, so the cell straight above it is safe.

  • The 1-2-2-1

    Mines across from the two 2s; the cells across from the 1s are safe.

    Each end is a 1-2, and each 1-2 puts a mine on the far side of its 2, which is the cell above the other 2. With both mines placed, every 2 is full and each 1 already touches its mine, so the cells above the 1s are safe.

  • The 1-1-1 corner

    A 1 that touches one covered cell has found its mine; the 1s beside it are then done.

    The 1 tucked diagonally into the corner touches a single covered cell, so that cell is a mine. The 1 above it and the 1 to its left both touch that mine too, so every other covered cell they touch is safe.

  • The 3 in a corner

    A number equal to its covered neighbours: all of them are mines.

    The 3 touches exactly three covered cells, so all three must be mines. The same holds for any number: a 2 with two covered neighbours, or a 1 with one. Corners and walls make this common, because they leave a cell with fewer neighbours.

  • Reduction: subtract known mines

    Take away the flags a number touches, then read the pattern that's left.

    The 2, 3 and 2 each touch the flagged mine below the 3. Subtract it and they become 1, 2 and 1, a 1-2-1 against the covered row: a mine above each outer number and a safe cell above the middle.

Drill the patterns

Each drill is one of the patterns above, turned or mirrored. Mark the cells the numbers prove safe, then check. Keyboard: Tab to the board, arrow keys to move, Space to mark.

Which covered cells are safe?

Drill 1 of 6

Row 1: 1, covered. Row 2: 1, covered. Row 3: 2, covered. Row 4: 1, covered. Row 5: 1, covered

Mark every covered cell the numbers prove safe. Leave a cell alone if it could still hide a mine. Thick edges are the side of the board.

No cells marked yet.

How to use it

  1. Learn the rule under each diagram, then look for its numbers on your board, in any direction: patterns work turned and mirrored.
  2. Before matching a pattern, subtract the flags each number already touches. A 2 touching one flag reads as a 1.
  3. Check the edges. Some patterns need the board's edge, or opened cells, beside them to work.
  4. Practise with the drills until you spot each pattern without counting.

How it works

A number counts the mines in the 8 cells touching it, diagonals included. Every pattern here is a shortcut for comparing two or three numbers that share covered cells: if one number's mines must sit inside the shared cells, the other number's remaining cells are settled.

Each diagram is built from a real mine layout, so its numbers are computed rather than typed. The page then tries every way the covered cells could hide mines that agrees with the numbers. A cell is marked as a mine or as safe only if it is the same in every one of those layouts. The drills are checked the same way.

Limits. Patterns only cover the common cases. Some positions need a longer chain of reasoning, and classic random Minesweeper sometimes leaves a true guess. The diagrams show a small piece of board; a dashed edge means the board carries on there.

Minesweeper pattern questions

  • What is the 1-2-1 pattern in Minesweeper?

    Three numbers 1, 2, 1 in a row along a straight edge of covered cells. The covered cell straight across from each 1 is a mine, and the cell straight across from the 2 is safe. It works in any direction.

  • What is the 1-2-2-1 pattern?

    Four numbers 1, 2, 2, 1 along a straight edge. The two covered cells straight across from the 2s are mines, and the cells across from the 1s are safe.

  • What does reduction mean in Minesweeper?

    Subtracting the mines you already know from a number before you read it. A 3 touching one flag needs only 2 more mines among its other covered cells, so a 2-3-2 beside a flag can read as a 1-2-1.

  • Do these patterns work on any board size?

    Yes. The patterns only use the numbers and the cells around them, so they hold on beginner, expert and custom boards alike, and in every direction.

  • What if no pattern fits?

    Look for a number whose remaining mines equal its covered neighbours (all mines) or are zero (all safe), then compare two numbers that share cells. If nothing is provable, you have to guess; in classic random Minesweeper some boards can't be solved without one.

Back to the basics

How to play Minesweeper

What the numbers mean, how the first click works, flagging, and the habits that make the patterns above easy to spot.

Read the guide

Where to play Minesweeper

  • Gridwise

    Logic puzzles in one calm app

    • Gridwise frames each Minesweeper level as 'flag every hazard'.
    • 300 levels on a path; every tenth level is a trophy level.
    • Plan on about 3 minutes for a level.
    • Stuck? Pip can nudge you, explain the next deduction or make it.
    • No lives, no energy and no signal needed.